Skippers Line Polifiber Primer
Out of stock
Special two-component primer formulated to give excellent adhesion on fiberglass surfaces. It is applied as a base coat on superstructures, sides or hulls of fiberglass boats. It can be applied directly on gelcoat after adequate degreasing of the surface with a suitable detergent and light sanding with fine abrasive paper.
0.00 Dhs
Out of stock
ComparePREPARATION OF THE SUPPORT AND APPLICATION CYCLE
Fiberglass and Plastic. The surface must be degreased with a suitable detergent, rinsed, lightly sanded with fine sandpaper and dusted. Apply a coat of POLIFIBER PRIMER, possibly followed by a second coat in the case of a very corrugated substrate. After 24 hours, sand with fine sandpaper and continue with the desired finishing cycle.
| color | White |
|---|
| Typology | Two-component |
| Type of binder sol a | Polyester |
| Type of binder sol b | Isocyanates |
| Specific weight kg / l (± 0.05) | 1.685 (A) – 1.040 (B) |
| Dry residue (volume) | 35% |
| Storage + 23 ° C (± 2) | 24 months in sealed containers |
| 40-60 sec. |
| Application | Roller and spray brush |
| Blend a + b by volume | 10 parts Sol.A with 3 Sol. B |
| Pot life a + b (20c) | Use mixture within 4-6 hours |
| Brush-roller dilution | 15-30% Thinner 203 or 205 |
| Spray dilution | 25-35% Thinner 203 |
| Touch dry | 2-3 hours (20 ° c) |
| Overcoating time | 18-24 hours (20 ° c) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 50 microns per hand |
| Theoretical yield m2 / liter | 10 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
-
Marine Paints, Jotun
Jotun Epoxy Filler Offwhite 2.5L Comp A 1.5L+ Comp B 1L
This is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion
resistance and compressive strength higher than concrete. To be used as filler only. Suitable for properly
prepared concrete surfaces.SKU: n/a
There are no reviews yet.