Skipper’s Propshark Propeller Antifouling Sol A + Sol B – 750 L
Ready to order? Get in touch with our team for product availability, pricing, and technical support. Visit our showroom to explore our full range of marine and industrial solutions.
+971 54 791 9422 / +971 50 369 8656
1,000.00 Dhs
CompareHighly slippery biocide-free antifouling paint, with excellent expansion, scratch-resistant, hard, and elastic. It is characterized by high slipperiness and
anti-adhesion, which facilitates surface cleaning, used as a finishing coat in the nautical sector, reduces the attack of marine fouling, especially both hard and soft
Fouling is recommended for propellers where speed is the turbulence generated by the rotation, which helps to keep the surface clean.
Biocide-free product.
TECHNICAL CHARACTERISTICS
| Application: Coating | Ready to use |
| Application: Spray | Ready to use – max 10% Thinner 203 |
| Application | Dilution |
| Mixture a+b by volume | 100pp Sol. A +50pp Sol. B |
| Mixture a+b by weight | 100pp Sol. A +50pp Sol. B |
| Pot life a+b (20c) | Use the mixture within 2-3 hours |
| Brush-roller dilution | ready for use |
| Spray dilution | 10% max if needed |
| Dust-free drying | 30 minutes (20c) |
| Overpainting time | no later than 1 hour, the second coat – after sanding |
| Application temperature | Between +10 c and +40 c |
| Application: by spreading | Ready to use |
| Application: Spray | Ready to use-max 10% Thinner 203 |
| Application | Dilution |
| Mixing ratio A+B by volume | 100pp Sol. A + 50pp Sol. B |
| Mixing ratio A+B by weight | 100pp Sol. A + 50pp Sol. B |
| Pot life A+B (20°C) | use within 2-3 hours |
| Brush-Roller | ready to use |
| Spray | 10% max se serve |
| Dust dry | 30 minutes (20c) |
| Recoat time | no later than 1 hour for the second coat – after sanding |
| Application temperature | Between +10 C and +40 C |
| Dry film thickness advised | 40 microns per hand |
| Theoret. coverage m2/Lt | 11-13 (= m2 / Kg) |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
Marine Paints, Jotun
Penguard HB white 5 L Comp A 4L+B 1L
- This is a two component, polyamide cured, high molecular weight epoxy coating.
- Designed as a high build, all purpose coating for new construction.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.
- Suitable for properly prepared carbon steel, stainless steel,aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
SKU: n/a -
Jotun, Marine Paints
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a
There are no reviews yet.