Skipper’s Plamur Finisher MDF Sol A +B 0.500 ml
Two-component epoxy finishing filler applied at low thickness for smoothing small and large surfaces of boats. Used in two-component coating systems. Once sanded provides a smooth and even finish ready to be overcoated.
Ready to order? Get in touch with our team for product availability, pricing, and technical support. Visit our showroom to explore our full range of marine and industrial solutions.
+971 54 791 9422 / +971 50 369 8656
250.00 Dhs
CompareMDF Plamur Filler is a premium two-component epoxy finishing filler designed for fine fairing and surface smoothing in marine, composite, industrial, and automotive applications. It is applied in thin layers to eliminate minor surface imperfections, pinholes, scratches, and uneven areas, creating an ultra-smooth substrate ready for priming and topcoating. Once cured and sanded, it delivers a uniform, high-quality finish that enhances the final appearance of the coating system.
TECHNICAL CHARACTERISTICS
| Paint Type | Two components |
| Binder type A | Epoxy modified |
| Binder type B | Ammine adduct |
| Code & colour A | 7F6332 |
| Code & colour B | 8Z6333 |
| Specific gravity kg/lt (±0,05) | 1.540 (Sol.A) – 0.980 (Sol.B) |
| Solids content (volume) ±2 | 100% |
| Viscosity Ford ø 8 at 20°C ±2 | Tixotropico (A+B |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Viscosity Ford (Ø4 a 20°C | Tixotropic (A+B) |
APPLICATION DATA
| Application | Spatula |
| Mixing ratio A+B by volume | 1 part Sol.A with 1 Sol.B |
| Sandable | After 24 hours |
| Touch dry | 6-8 h ( 20°C) |
| Spatula | Ready to use |
| Recoat time | Minimum 24-36 h (20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 300 microns per coat |
| Theoret. coverage m2/Lt | 4 for a thickness of 250 microns |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Jotamastic 80 Blk /4.6 L Comp A 4L +B 0.6L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub-zero surface temperatures.
SKU: n/a -
-
Jotun, Marine Paints
Seaforce Active Dark Red 5L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a
There are no reviews yet.