Skipper’s Plamur Finisher MDF Sol A +B 0.500 ml
Two-component epoxy finishing filler applied at low thickness for smoothing small and large surfaces of boats. Used in two-component coating systems. Once sanded provides a smooth and even finish ready to be overcoated.
Ready to order? Get in touch with our team for product availability, pricing, and technical support. Visit our showroom to explore our full range of marine and industrial solutions.
+971 54 791 9422 / +971 50 369 8656
250.00 Dhs
CompareMDF Plamur Filler is a premium two-component epoxy finishing filler designed for fine fairing and surface smoothing in marine, composite, industrial, and automotive applications. It is applied in thin layers to eliminate minor surface imperfections, pinholes, scratches, and uneven areas, creating an ultra-smooth substrate ready for priming and topcoating. Once cured and sanded, it delivers a uniform, high-quality finish that enhances the final appearance of the coating system.
TECHNICAL CHARACTERISTICS
| Paint Type | Two components |
| Binder type A | Epoxy modified |
| Binder type B | Ammine adduct |
| Code & colour A | 7F6332 |
| Code & colour B | 8Z6333 |
| Specific gravity kg/lt (±0,05) | 1.540 (Sol.A) – 0.980 (Sol.B) |
| Solids content (volume) ±2 | 100% |
| Viscosity Ford ø 8 at 20°C ±2 | Tixotropico (A+B |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Viscosity Ford (Ø4 a 20°C | Tixotropic (A+B) |
APPLICATION DATA
| Application | Spatula |
| Mixing ratio A+B by volume | 1 part Sol.A with 1 Sol.B |
| Sandable | After 24 hours |
| Touch dry | 6-8 h ( 20°C) |
| Spatula | Ready to use |
| Recoat time | Minimum 24-36 h (20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 300 microns per coat |
| Theoret. coverage m2/Lt | 4 for a thickness of 250 microns |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, International
International Intergard 5600 20L
A light coloured, epoxy universal primer
- For use as an anticorrosive universal primer in ballast tanks, outer hull, cofferdams, void spaces, decks, cargo holds and crude oil tanks.
- Suitable for use with controlled cathodic protection.
- For use at Newbuilding or Maintenance & Repair.
SKU: n/a -
-
Jotun, Marine Paints
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Plus D Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a
There are no reviews yet.