West System 105 Epoxy Resin 5Kg – Part 1
105 Epoxy Resin® is a clear, low-viscosity liquid epoxy resin. Formulated for use with one of four WEST SYSTEM® hardeners. It can be cured in a wide temperature range to form a high-strength solid bond with excellent moisture resistance. 105 Epoxy Resin, when mixed at the proper ratio with a WEST SYSTEM hardener, is an excellent adhesive.
Epoxy for Wood, Fiberglass, Aluminium, Steel and Ferro-cement.
Compare
PROJECT USES:
- Marine
- Boat Repair
- Adhesion
- Fabrication
- Molding
- Furniture
- Casting
CURE TIME:
Working time (thin film) is based on which hardener you choose at 72°F (22°C):
- 205 Fast Hardener®: 60 to 70 minutes
- 206 Slow Hardener®: 90-110 minutes
- 207 Special Clear Hardener®: 100-200 minutes
- 209 Extra Slow Hardener®: 3-4 hours
CURE TEMP:
Based on which hardener you choose, solid-state curing happens in a wide range of durations at 72°F (22°C). Minimum recommended temperatures:
- 205 Fast Hardener®: 40°F (4°C)
- 206 Slow Hardener®: 60°F (16°C)
- 207 Special Clear Hardener: 60°F (16°C)
- 209 Extra Slow Hardener®: 70˚F (21˚C)
Brand
West System
Related products
-
Marine Paints, Epoxy Repair Kit, West System
West System 206 Slow Hardener 1Kg – Part 2
206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin® in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.
SKU: n/a -
Epoxy Repair Kit, West System
West System Epoxy 655-K G/Flex
G/flex® 655 Epoxy Adhesive is the result of years of experimentation to develop a toughened epoxy that is simple to use and adheres tenaciously to a variety of materials under difficult conditions.
Sample projects include repair to plastic canoes and kayaks, wooden boats, and household and sporting equipment. Also included are tips on gluing to wet surfaces and gluing underwater, joining wood, gluing in fasteners, and blending epoxies
G/flex 655 is, first of all, a high-strength epoxy—designed for permanent, waterproof, structural bonding. Furthermore, G/flex has a modulus of elasticity of 1.03 GPa, which gives G/flex the toughness to make structural bonds that can absorb the stresses of expansion, contraction, shock, and vibration.
SKU: n/a -
Marine Paints, Epoxy Repair Kit, West System
West System Epoxy A Pack; 105 Epoxy Resin 1Kg+ 206 Hardener Slow 0.2Kg
Marine Paints, Epoxy Repair Kit, West SystemWest System Epoxy A Pack; 105 Epoxy Resin 1Kg+ 206 Hardener Slow 0.2Kg
The WEST SYSTEM® 105/205 A Pack is ideal for general coating and bonding tasks, especially in cold conditions. It cures quickly at room temperature, developing its physical properties rapidly. This epoxy forms a high-strength, moisture-resistant solid with excellent bonding and barrier coating capabilities. It adheres well to wood fibre, fibreglass, reinforcing fabrics, foam, various composite materials, and metals.
You can thicken 105/205 Epoxy with WEST SYSTEM fillers to bridge gaps and fill voids. Once cured, it can be sanded and shaped. When applied with a roller, it exhibits excellent thin-film characteristics, flowing out and self-levelling without “fish-eyeing.” Multiple coats provide a superior moisture barrier and a durable base for paints and varnishes.
Formulated without volatile solvents, it has a very low VOC content, a relatively high flash point, no strong solvent odour, and does not shrink after curing. However, it is not suitable for clear-coating natural finished wood.
SKU: n/a -
Epoxy Repair Kit, West System, Marine Paints
West System 209 Extra Slow Hardener 1.45Kg – Part 2
209 Extra Slow Hardener® is formulated for use with WEST SYSTEM® 105 Epoxy Resin® or general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately twice the working time of 206 Slow Hardener®. 105/209 forms a high-strength, moisture-resistant solid with excellent bonding and coating properties. The mix ratio is 3 parts resin to 1 part hardener by volume. Not intended for clear coating.
SKU: n/a
