West System 206 Slow Hardener 1Kg – Part 2
206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin® in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.
Compare
PROJECT USES:
- Marine
- Boat Repair
- Bonding
- Fabrication
- Barrier Coating
CURE TIME:
- Pot life (100 grams cupful):
- At 72°F (22°C): 20 to 25 minutes
- Working time (thin film):
- At 72°F (22°C): 90 to 110 minutes
- Solid state:
- At 72°F (22°C): 10 to 15 hours
CURE TEMP:
- Minimum: At 60°F (16°C)
Brand
West System
Related products
-
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
International, Marine Paints
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a -
Marine Paints, International
International Thinner GTA 007 5L
International Thinner GTA 007 is a specially formulated blend of solvents designed to mix with its compatible paint/coating to create optimal consistancy for application.It can also be used for cleaning some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment after application.
SKU: n/a
