West System 206 Slow Hardener 1Kg – Part 2
206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin® in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.
Compare
PROJECT USES:
- Marine
- Boat Repair
- Bonding
- Fabrication
- Barrier Coating
CURE TIME:
- Pot life (100 grams cupful):
- At 72°F (22°C): 20 to 25 minutes
- Working time (thin film):
- At 72°F (22°C): 90 to 110 minutes
- Solid state:
- At 72°F (22°C): 10 to 15 hours
CURE TEMP:
- Minimum: At 60°F (16°C)
Brand
West System
Related products
-
International, Marine Paints
International Micron 350 Antifouling Paint 2.5L
Micron antifoul has been a favourite for years among YouBoat customers, and the latest formula is no different. Micron 350 is a high strength self polishing antifouling that will offer excellent 2 seasons protection from just one application (3-4 coats)
SKU: n/a -
Marine Paints, Jotun
Jotun Megaprimer 5L Comp A 4L+ Comp B 1L
This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a sandable, high
build, all purpose coating. Can be used as primer or sealer for fillers in atmospheric and immersed environments.
Suitable for properly prepared carbon steel, aluminium, shop primed steel, composite and wooden substratesSKU: n/a -
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a
